PMDC MOTORS 41-42 FROM 20 TO 40 WATTS
PMDC motors supplied in 12 or 24 Vdc.
Applicable to sm drives in continuous or intermittent duty, as pumps, electric locks, linear actuators, laboratory machine, toys, fans, etc..
Can be supplied at different voltages indicated, two sizes 25 and 40 watts of mechanical power output shaft.
Features
Toty enclosed, non ventilated (IP-40), epoxy paint finish, injected plastic caps.
Permanent magnets ferrite ceramic, laminated armature able to work with electronic speed control (PWM)
SAE1040 steel shaft, self-lubricating b bearings. Internal brushes, front mounting
Performance Curves:
Figure1 s the characteristic curves of permanent magnet motors, the data for each model listed in table1.
The nominal values are set for self-ventilated motors for continuous duty for other operating conditions are recommended to consult with our technical staff.
Pm: Mechanical Power on Shaft.
Un: Nominal Voltage.
In: Nominal Current.
nn: Nominal Speed.
Tn: Nominal Torque.
n0: No load Speed.
Ta: Starting Torque.
Ia: Starting Current.
Table1 - Available Models
|
|
Nominale Values |
|
|
|
|
|
||||
|
Model |
Pm |
Un |
In |
nn |
Tn |
n0 |
Ta |
Ia |
Long L |
Weight |
|
|
Watt |
Volt cc |
Amp. |
rpm |
Ncm |
rpm |
Ncm |
Amp. |
mm |
kg |
|
411201 |
20 |
12 |
2.5 |
4000 |
5.0 |
4700 |
45 |
15 |
90 |
0.56 |
|
411202 |
20 |
12 |
2.8 |
5000 |
4.0 |
5700 |
38 |
19 |
90 |
0.56 |
|
411203 |
25 |
12 |
3.8 |
6000 |
4.0 |
6700 |
45 |
25 |
90 |
0.56 |
|
411204 |
25 |
12 |
4.4 |
10000 |
2.5 |
11000 |
36 |
35 |
90 |
0.56 |
|
411205 |
10 |
12 |
1.2 |
1800 |
5.0 |
2000 |
30 |
7 |
90 |
0.56 |
|
411206 |
5 |
12 |
0.8 |
1700 |
2.5 |
2000 |
18 |
4 |
90 |
0.56 |
|
411207 |
15 |
12 |
1.6 |
3200 |
3.0 |
3800 |
34 |
12 |
90 |
0.56 |
|
412401 |
20 |
24 |
1.5 |
4000 |
4.5 |
4500 |
40 |
11 |
90 |
0.56 |
|
412402 |
20 |
24 |
1.7 |
5000 |
4.0 |
6100 |
45 |
13 |
90 |
0.56 |
|
412403 |
20 |
24 |
1.5 |
6000 |
3.5 |
6500 |
40 |
13 |
90 |
0.56 |
|
412404 |
25 |
24 |
2.8 |
9000 |
2.4 |
10000 |
65 |
30 |
90 |
0.56 |
|
412405 |
10 |
24 |
0.8 |
1800 |
4.5 |
2300 |
23 |
3 |
90 |
0.56 |
|
412407 |
15 |
24 |
1.2 |
3500 |
4.0 |
4100 |
27 |
6 |
90 |
0.56 |
|
421201 |
30 |
12 |
4.0 |
4000 |
7.0 |
5300 |
50 |
23 |
103 |
0.68 |
|
421202 |
30 |
12 |
4.5 |
5000 |
5.6 |
6000 |
37 |
21 |
103 |
0.68 |
|
421203 |
30 |
12 |
4.0 |
6000 |
4.5 |
7500 |
44 |
29 |
103 |
0.68 |
|
421205 |
15 |
12 |
2 |
2000 |
5 |
2900 |
26 |
9 |
103 |
0.68 |
|
422401 |
30 |
24 |
1.8 |
4000 |
6.0 |
5300 |
40 |
10 |
103 |
0.68 |
|
422402 |
30 |
27 |
2.4 |
5000 |
5.5 |
6100 |
52 |
18 |
103 |
0.68 |
|
422403 |
40 |
24 |
2.5 |
6000 |
5.2 |
7800 |
60 |
22 |
103 |
0.68 |
|
422405 |
20 |
24 |
1 |
2500 |
7 |
3000 |
38 |
5 |
103 |
0.68 |
Technical download:
Download: M41_2.pdfDownload: M41_2English.pdf